DIMENSIONS |   RT1850 |   RT2100
Length | : |   850 mm |   850 mm
Width | : |   2030 mm |   2230 mm
Height | : |   1040 mm |   1040 mm
Weight | : |   472 kg |   506 kg
Connection Type | : |   Three Point Hitch System (Category I and II)
 
TECHNICAL SPECIFICATIONS |   RT1850 |   RT2100
Tractor Power | : |   50 – 60 HP |   60 – 70HP
Powered by | : |   Tractor Power Take-Off
Blade Type | : |   L Type |   L Type
Blade Material Hardness | : |   46 – 50 HRC |   46 – 50 HRC
Blade Number | : |   42 Pcs |   48 Pcs
Flange Number | : |   8 Pcs |   9 Pcs
Sliding Type | : |   Mechanical |   Mechanical
Power Drive Type | : |   Safety Clutch Disk |   Safety Clutch Disk
Working Width | : |   1710 mm |   1960 mm
Working Depth | : |   150 mm – 220 mm |   150 mm – 220 mm
Capacity | : |   3.5 – 4.2  da/h |   4.0 – 5.2  da/h
IDENTIFICATION
RT Rotovators were designed to prepare plantation beds in orchards
greenhouses and vines
mixing manure with soil
disintegrate clubs
weeds and stems
and to prepare the soil which is processed with a plough or subsoiler for plantation
It efficiently disintegrates
ruffles and mixes soil. It is an ideal soil processing and seed bed preparing tool
It progresses by leveling the processed field thanks to the back cover
Unlike the accustomed situation
it does not squeeze or excessively press soil. It tears and disintegrates any pressed or clod soil
It effectively approaches the stocks with its mechanical sliding system and thus ensures the processing of more area minimizing hoeing labor necessary
The power drive has a safety mechanism (clutch disc) and it prevents the tractor or the machine from being damaged in the case the machine is jammed due to a stone or root
It performs the work which is normally performed by several equipment. It thus saves fuel
time and investment in equipment
Its operational efficiency is higher than a plough and thus it decreases cost of soil processing and enables time-saving
OPERATION PRINCIPLE
The machine is connected to a tractor through a three-point hitch mechanism. The driveshaft is connected to the power take-off a tractor. Motion is taken from the power takeoff as 540 RPM and transmitted to the rotor with blades with the help of gearboxes. Soil processing is started after the operation depth is adjusted as desired with the help of the sledge supports on the two sides of the machine. Low progression speed creates smaller soil pieces
high progression speed result bigger soil pieces. The disintegration which is most suitable to the soil structure can be enabled by adjusting the movement speed of the tractor
Ask and Receive your offer same day!!!